Alcatel One Touch 310 User Manual download pdf (Page 5)

Interoperability between ProCurve WESM zl and Alcatel-Lucent IP Touch Wireless LAN phones

HP ProCurve Networking

3. Click the Config button, and configure the pre-shared key as follows.

o ASCII passphrase: procurve

o Enable all three Fast Roaming options (PMK caching, Opportunistic key caching, Pre-authentication).

4. Click OK to return to the main Edit window.

5. In the main Edit window, under Advanced, select Closed System, then click OK.

6. Finally, to enable the new WLAN, at the bottom of the WLAN list window click the Enable button.

4.2 Configure the Alcatel-Lucent phone for encryption

To open the administration menu on an Alcatel-Lucent wireless telephone:

1. Access the phone administration menu: With the handset powered off, press and hold the START (green)

key. While holding the START key, press and release the END (red) key. When the Admin menu appears,

release the START (green) key.

2. If prompted, enter the admin password. Default password is 123456.

3. Once in the Admin menu, use the navigation keys just below the softkeys to navigate and select desired

options. Enter numbers by pressing the buttons on the keypad.

4.2.1 Configure the phone:

• Language: Choose your language.

• Telephony protocol: Leave set to the default.

• Password enable/disable: Enable or disable the admin password.

1 2 3 4 5 6 7 8 9 10 11

No comments

Alcatel One Touch 310 User Manual Page 5