Alcatel One Touch 310 User Manual download pdf (Page 6)

Interoperability between ProCurve WESM zl and Alcatel-Lucent IP Touch Wireless LAN phones

HP ProCurve Networking

4.2.2 Configure the network:

For network configuration:

• IP addresses: You have the choice between DHCP and Static:

o Use DHCP (default): If you select Use DHCP, the DHCP scope in the DHCP server must be

configured with the following options:

Option Code Description

1 Subnet mask

3 Default gateway

6 DNS server

15 Domain name

66 TFTP server

151 SVP server

152 OAI gateway

o Static IP: If you use a static IP address, configure the following parameters. Enter IP addresses and

masks as a single number, with no periods in between:

 Phone IP

 Default Gateway

 Subnet Mask

 TFTP Server IP: Address of the server that will be used for firmware updates

 Syslog Server IP

 Time Server IP

 SVP IP address

 Alcatel TFTP Info

 OAI Server IP

• SSID: voice

• Security: WPA-PSK

• Passphrase: procurve

• Reg Domain: Regulatory domain. This should be:

o 01 for North America

o 02 for Europe

Note: From the Network Config menu itself, you can view the Reg Domain but not modify it. To modify the

Reg Domain, while in the Network Config menu click on the bottom right phone button (the loudspeaker key,

the one with the volume icon).

• Once the regulatory domain is set, choose the 802.11 mode:

o a

o b and b/g mixed

o g only

On the WESM, you can now see the phone in Device Association > Wireless stations. You can view the MAC

address, IP address, WLAN, VLAN, and Radio Index.

On the phone you can view similar information in System > Network > Info.

1 2 3 4 5 6 7 8 9 10 11

No comments

Alcatel One Touch 310 User Manual Page 6