Alcatel 6648 User's Guide download pdf (Page 56)

Removing MiniGBICs OmniSwitch 6600 Series Chassis and Hardware Components

page 2-36 OmniSwitch 6600 Series Hardware Users Guide April 2004

2 Push the MiniGBIC into the slot until it is completely inserted and securely seated in the

OS6600-GNI-U2 module on OmniSwitch 6624, 6600-U24, and 6648 switches, as shown.

Installed MiniGBIC (OS6648 Shown)

Removing MiniGBICs

MiniGBICs modules can be hot swapped. You are not required to power off the switch before removing a

MiniGBIC from the uplink module. To remove a MiniGBIC from the uplink module, follow the steps

below:

Anti-Static Warning. Before handling any components, free yourself of static by wearing a grounding

strap, or by grounding yourself properly. Static discharge can damage the MiniGBIC, as well as the switch

and uplink module.

1 On OmniSwitch 6624, 6600-U24, and 6648 switches only, make sure that the captive screws on the

OS6600-GNI-U2 are tightened and the module is securely installed in the chassis.

2 There is a small removal handle at the front of the MiniGBIC transceiver. Carefully lift this handle;

then, grasp the handle and carefully pull the MiniGBIC from the module.

3 Store the MiniGBIC in a secure, static-free location. Placing the MiniGBIC in an anti-static bag is

recommended.

EXPANSION/STACKING

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 113 114

No comments

Alcatel 6648 User's Guide Page 56