Alcatel 6648 User's Guide download pdf (Page 50)

Installing Uplink and Stacking Modules OmniSwitch 6600 Series Chassis and Hardware Components

page 2-30 OmniSwitch 6600 Series Hardware Users Guide April 2004

3 Slide the module back until the backplane connector is inserted in the chassis backplane; the module’s

front panel should be flush with the front of the chassis. Do not force the module into the slot. Otherwise

you can damage the connectors.

4 Once the module is firmly seated and flush with the chassis front panel, secure the module by tighten-

ing the two captive screws. Be sure not to overtighten the captive screws. If you use a screwdriver, the

torque used to tighten the screws must not exceed 2.3 inch pounds.

Tightening the Captive Screws

EXPANSION/STACKING

LINK/ACT

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 113 114

No comments

Alcatel 6648 User's Guide Page 50