Alcatel 4032D User Manual download pdf (Page 15)

29 30

BA• TTERY:

Observe the following precautions for battery use:

- Do not attempt to open the battery (due to the risk of toxic fumes

and burns).

- Do not puncture, disassemble or cause a short-circuit in a battery.

- Do not burn or dispose of a used battery in household rubbish or store

it at temperatures above 60°C.

Batteries must be disposed of in accordance with locally applicable

environmental regulations. Only use the battery for the purpose for which

it was designed. Never use damaged batteries or those not recommended

by TCT Mobile Limited and/or its affiliates.

This symbol on your telephone, the battery and the accessories

means that these products must be taken to collection points

at the end of their life:

- Municipal waste disposal centres with specific bins for these

items of equipment

- Collection bins at points of sale.

They will then be recycled, preventing substances being disposed of in the

environment, so that their components can be reused.

In European Union countries:

These collection points are accessible free of charge.

All products with this sign must be brought to these collection points.

In non European Union jurisdictions:

Items of equipment with this symbol are not to be thrown into ordinary

bins if your jurisdiction or your region has suitable recycling and collection

facilities; instead they are to be taken to collection points for them to be

recycled.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO

THE INSTRUCTIONS.

CHARGERS•

Mains powered chargers will operate within the temperature range of:

0°C to 40°C.

The chargers designed for your mobile phone meet with the standard

for safety of information technology equipment and office equipment use.

They are also compliant to the ecodesign directive 2009/125/EC. Due to

different applicable electrical specifications, a charger you purchased in one

jurisdiction may not work in another jurisdiction. They should be used for

this purpose only.

RADIO WAVES:•

Specific Absorption Rate (IEEE)

THIS MOBILE PHONE MEETS THE GOVERNMENT’S REQUIREMENTS

FOR EXPOSURE TO RADIO WAVES.

Your mobile phone is a radio transmitter and receiver. It is designed and

manufactured not to exceed the emission limits for exposure to radio-

frequency (RF) energy. These limits are part of comprehensive guidelines

and establish permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by independent

scientific organizations through periodic and thorough evaluation of scientific

studies. These guidelines include a substantial safety margin designed to ensure

the safety of all persons, regardless of age and health.

The exposure standard for mobile phones employs a unit of measurement

known as the Specific Absorption Rate, or SAR. The SAR limit set by public

authorities such as the Federal Communications Commission of the US

Government (FCC), or by Industry Canada, is 1.6 W/kg averaged over 1

gram of body tissue. Tests for SAR are conducted using standard operating

positions with the mobile phone transmitting at its highest certified power

level in all tested frequency bands.

Although the SAR is determined at the highest certified power level, the

actual SAR level of the mobile phone while operating can be well below the

maximum value. This is because the mobile phone is designed to operate

at multiple power levels so as to use only the power required to reach the

network. In general, the closer you are to a wireless base station antenna,

the lower the power output of the mobile phone. Before a mobile phone

model is available for sale to the public, compliance with national regulations

and standards must be shown.

The highest SAR value for this model mobile phone when Tested is 1.02 W/kg

for use at the ear and 1.36 W/kg for use close to the body.

While there may be differences between the SAR levels of various mobile

phones and at various positions, they all meet the government requirement

for RF exposure. For body-worn operation, the mobile phone meets FCC RF

exposure guidelines provided that it is used with a non-metallic accessory with

the handset at least 1.0 cm from the body. Use of other accessories may not

ensure compliance with FCC RF exposure guidelines.

Additional information on SAR can be found on the Cellular Telecommunications

& Internet Association (CTIA) Web site: http://www.phonefacts.net

The World Health Organization (WHO) considers that present scientific

information does not indicate the need for any special precautions for use of

mobile phones. If individuals are concerned, they might choose to limit their

own or their children’s RF exposure by limiting the length of calls, or using

“hands-free” devices to keep mobile phones away from the head and body.

(fact sheet n°193). Additional WHO information about electromagnetic

fields and public health are available on the following website: http://www.

who.int/peh-emf.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference to radio

or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult the dealer or an experienced radio/ TV technician for help.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

For the receiver devices associated with the operation of a licensed radio

service (e.g. FM broadcast), they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to

the condition that this device does not cause harmful interference.

For other devices, they bear the following statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

(1) this device may not cause harmful interference

(2) this device must accept any interference received, including interference

that may cause undesired operation.

IP4909_4032D_QG_Eng_GB_India & Sri Lanka_02_140617.indd 29-30IP4909_4032D_QG_Eng_GB_India & Sri Lanka_02_140617.indd 29-30 2014-6-17 17:44:132014-6-17 17:44:13

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Alcatel 4032D User Manual Page 15

Comments to this Manuals

Related products and manuals for Smartphones Alcatel 4032D